Talk to our experts: +966 51 083 8213
ultra high molecular weight polyethylene supplier

GuideDiode Trading EST · 4 min read

Why Density Matters for Load-Bearing Capacity

Published date 10 July, 2025 | Author Admin
outrigger mats supplier in Saudi Arabia

Density on its own doesn’t decide a material’s load-bearing capacity. Strength does. Density matters in engineering because it sets how much a part weighs for a given size, and that weight changes everything around it: how much the part loads itself, how easily people can move it, and how much material you need to hit a target strength. So the useful question is how much strength you get per kilogram.

That ratio has a name. Engineers call it specific strength: strength divided by density. It explains why aircraft use aluminium and titanium, why bridges still use steel, and why the outrigger pads on a Saudi crane site are now mostly plastic.

Why density is important in engineering

Here are a few common materials and their approximate densities:

Material Approx. density (kg/m³) Where it earns its place
Structural steel 7,850 Beams, crane booms, heavy frames
Titanium 4,507 Aerospace parts where weight costs money
Aluminium 2,700 Vehicle bodies, light frames, ladders
Normal concrete about 2,400 Foundations, slabs, columns in compression
UHMWPE (polyethylene) about 930 to 940 Outrigger pads, wear strips, liners

Steel is roughly eight times denser than UHMWPE. It’s also far stronger in tension and far stiffer. If density simply equalled load capacity, the table would rank itself. It doesn’t, because each material fails in a different way.

Concrete is the clearest example. It’s dense and very good in compression, yet weak in tension, which is why reinforced concrete carries steel bars on the tension side. Same density, two very different answers depending on how you load it.

Weight also feeds back into the design. A steel member has to carry its own mass before it carries anything else, and on long spans that self weight becomes a big share of the total load. Lighter materials free up capacity for the payload, which is the whole argument behind aluminium in vehicles and titanium in aircraft.

Where denser really is better

Some jobs want mass. Counterweights on cranes work because they’re heavy. Foundations and retaining walls rely partly on weight to resist sliding and overturning. Dense materials also tend to be stiffer, so a steel beam deflects less than an aluminium beam of the same section.

Cost runs the other way more often than people expect. Titanium beats steel on strength per kilogram but costs much more to buy and machine. Most structures don’t save enough weight to justify that, so steel stays the default.

What this means for outrigger pads

An outrigger pad has one job: spread the crane’s reaction force over a bigger area so the ground isn’t overloaded. Ground bearing pressure is force divided by contact area. The pad material needs enough stiffness and toughness to spread that force without cracking, but it doesn’t need to be dense.

Size the comparison yourself. A 1 m by 1 m pad, 50 mm thick, holds 0.05 m³ of material:

  • Steel: about 390 kg
  • Aluminium: about 135 kg
  • UHMWPE: about 47 kg

Two riggers can place a 47 kg pad by hand. A 390 kg steel plate needs the crane or a forklift, every time, at every outrigger. That’s why polyethylene pads replaced steel and timber on so many sites. UHMWPE also shrugs off moisture and doesn’t rot, which matters when pads sit on wet ground or get washed down.

Steel plates still have a place under very high point loads or where heat is a concern, since polyethylene softens at far lower temperatures than steel. For most mobile crane work, though, the lighter pad wins on handling, safety and life.

Our outrigger pads are made from engineered polymer and sized to the crane and the ground. For the bigger picture on how the system works, see our guide to the crane outrigger.

Common questions

Does higher density mean higher strength?

Not by itself. Density and strength often rise together in metals, but polymers and composites can carry high loads at low density. Compare specific strength instead.

Why do engineers care about strength to weight?

Because every kilogram saved is load the structure no longer has to carry, fuel a vehicle no longer burns, or effort a crew no longer spends lifting.

Is a lighter outrigger pad less safe?

Not when it’s sized correctly. Safety depends on the pad’s area, thickness and rated capacity matched to the crane’s outrigger load and the ground. Weight isn’t on that list.

Sources

Products related to this article

Diode Trading EST supplies these Outrigger Pads & Crane Pads from stock in Dammam, with delivery across Saudi Arabia and the GCC.

Stock in Dammam · MTC with every order

Need a price or lead time? Talk to our sales team.

Diode Trading EST is part of the Ariane Ventures group: Rig move services · ARAMCO standard porta cabins · Crane rental · Heavy equipment rental in Saudi Arabia
Call for Assistance Company Profile