Enquire Now
Enquire Now
This page collects downloadable technical datasheets for our product range — dimensions, load ratings, material composition, and testing standards — so engineers and procurement teams can specify the right product without digging through individual product pages.
We are currently uploading datasheets for each product line. Check back regularly as more are added, or contact us if you need a specific datasheet in the meantime.
Every product line we manufacture and trade — from SafeRig™ UHMWPE outrigger pads to rubber matting, PTFE components, and engineering plastics — is built to a documented material and dimensional standard. Procurement teams and site engineers use the technical specifications on this page to confirm load capacity, thickness tolerances, material composition, and testing methodology before a purchase order is raised, so the pad or component that arrives on site is guaranteed to match what was specified in the project’s lifting plan or method statement.
Where a datasheet below is marked “Coming Soon,” that product line’s technical documentation is still being finalized and uploaded — we would rather leave a card empty than publish a specification we have not verified. In the meantime, our sales team can supply the equivalent technical data directly, including material test certificates (MTC) where applicable, on request.
All dimensions on this site are given in millimeters (mm) and all load ratings in metric tonnes (T) unless otherwise noted, consistent with the specifications used across our SafeRig™ outrigger pads product page, which currently carries our most complete published technical datasheet, including a full 25-size load capacity chart.
Load capacity, thickness options, and material specs for our Saferig outrigger pad range.
Panel dimensions, load ratings, and installation specs for temporary ground protection.
Fender profiles, sizing charts, and abrasion-resistance ratings for marine applications.
Sizing, load rating, and material specs for heavy vehicle and trailer wheel chocks.
Impact-resistance ratings and mounting specs for polyethylene dock bumpers.
Specifications for polyurethane and rubber container-securing pads used in port and marine cargo handling.
Chemical-resistance and temperature ratings for PTFE sheets, rods, and gaskets.
UHMWPE, HDPE, PP, Nylon (cast and extruded), POM, PVC (rigid and flexible), Polycarbonate, Acrylic, PEEK, PVDF, PET, ABS, Phenolic (Bakelite), Glass-Epoxy, PTFE and PU. Rods, sheets, bushes, tubes, welding rods, rolls and machined components.
Pressure and temperature ratings for rubber, non-asbestos, PTFE and cork gasket materials, plus ready-cut gaskets.
Thickness options, slip-resistance, and wear ratings for industrial rubber matting.
Shock-absorption and thickness specs for rubber gym and sports flooring tiles and rolls.
Rubber corner guards, wall guards, speed humps, wheel stoppers, dock bumpers, bollards and bearing pads.
Standard, double-ribbed, polar, anti-insect and welding-screen strips for cold rooms and loading docks.
Wear strips, channel, T and belt guide profiles for chain and conveyor lines.
O-rings, oil seals, hydraulic and pneumatic seals, guide rings and wear bands.
If the specific product line you need is still marked “Coming Soon” above, contact our sales team directly with the product name and your application and we will send the equivalent technical data sheet, along with any relevant material test certificates, typically within one business day.
All published technical specifications on this site are reviewed periodically and corrected if a discrepancy is found between the on-page table, the downloadable PDF datasheet, and our internal quality records.
Whether you are specifying a single outrigger pad for a one-off lift or building a bill of materials for a multi-crane, multi-month site mobilization, we recommend confirming the current revision of a datasheet with our sales team before finalizing your procurement documentation, since specifications are occasionally updated as products are re-tested or improved.